An overview of SBB PRO2 V48.88


An outline of the SBB PRO2 version 48.88

When driving on well-traveled highways, the incredible smoothness of more costly automobiles is a huge benefit. When you purchase a vehicle from a well-known manufacturer like Chevrolet, you get radio transmission technology as standard equipment. The SBB PRO2 V48.88 is a chip key that operates based on the principle that radio communication occurs between the vehicle and the key. These automobiles can only read the language stored on the chip key, and replacing the key comes at a significant financial cost if it is misplaced. The electronic key with the chip is tailored according to the make and model of the automobile. A particular coding method is used by this key whenever the automobile door is locked or unlocked. The chip key technology is only available for higher-end versions of automobiles at this time. An updated version of V48.88, the SBB PRO2 V48.88  key programmer is now available.

Sbb pro2 key programmer: Identifying characteristics

Many high-end automobiles are capable of understanding many languages, including English, French, Portuguese, and Italiano. Chip key technology is used in the operation of more recent automobile models from manufacturers like Toyota, Honda, and Ford. Sbb pro2 is a software version that operates based on the technology of radio transmission. The SBB PRO2 V48.88 is an essential programmer for immobilized memory as well as the newest technology for remote control. The SBB pro2 will copy the chip in the car key as soon as the owner puts it into the keyhole, and it will function differently depending on the kind of vehicle. Because the operation of the chip key is entirely technological, the owner is required to have a fundamental understanding of technology. After the key chip has been inserted, the device will read the make and model of the vehicle and then transmit a serial number to the key holder. After you have validated the serial number and confirmed it, your vehicle will start up.

Sbb pro2 is the key programmer that you should have for your vehicle.

The programming of car keys is quite common since it does not need the assistance of computer programming. The SBB PRO2 V48.88  is the key transponder that is the most user-friendly for automotive specialists and customers. The SBB Pro2 Key Programmer was developed specifically for use with a wide variety of upscale automobile models. Users can effortlessly copy and enter the transponder key with the use of the internet and radio frequency. This programmer's most useful function is that it can automatically adapt to new circumstances as they arise. Online vendors provide key transponders for sale at prices that are within consumers' price ranges. You can operate several high-priced autos with the assistance of the Sbb pro2 key programmer. You can read the key memory stored internally in the vehicle thanks to the key chip technology. The SBB Pro2 is the industry's quickest key programmer, and its accuracy comes at a lower price than that of competing transponder technologies.



Features that Set Apart the Sbb Pro2 Key Programmer:

  1. SBB PRO2 Key Programmer Software Version: 48.88
  2. The following languages are supported: English, Italiano, German, French, Spanish, Portuguese, and Turkish.
  3. There are no restricted tokens involved.
  4. Show your support for the Toyota G Chip.
  5. This replacement version of the SBB Key Programmer belongs to a new generation of the device.
  6. Show your support for Honda, Toyota, and Ford... The year 2017.
  7. SBB V33.01 is supported up till 2011.

12, SBB V46.02 is supported up till 2015.

The Functions of the SBB Pro2 Key Programmer

  1. Adding more keys to the program
  2. Extracting keys from the immobilizer's memory and entering the pin code
  3. Reactivating keys that are no longer in the hands of the vehicle's owner
  4. Operation via the use of menus to direct the programming
  5. Programming brand-new remote controllers using the SBB PRO2 Key. Making keys with SBB PRO2 and

how to use it:

  • Insert the blank new key into the keyhole of your vehicle before beginning to use the SBB PRO2 key programmer.
  • Activate the ignition switch.
  • Place the SBB 16-pin interface into the OBD2 diagnostic seat of your vehicle.
  • Make sure to pay attention to the directions that are shown on the SBB screen.

SBB PRO2 key programmer copies chip according to car model, and it programs key rather than cloning key. All that is required of you is to insert the SBB 16-pin interface into your car's OBD2 diagnostic seat, then read out the immobilizer pin code from the immobilizer dump/EEPROM of the car before writing it into a new blank key. There is no need for a pin code whenever a Ford car is being programmed.

The SBB PRO2 package comes with the following items:

1 x SBB PRO2 Main Unit

1pc x OBD II cable

1pc x RS232 cable for firmware upgrade

1 piece replacement cable for the cigarette lighter.

1pc x CD including the user manuals and upgrading software for the Sbb pro2 Key Programmer


Electrical plug-equipped products are acceptable for use in the United States. You may require an adapter or converter to operate this item at your destination due to the variance in voltage and power outlets across nations. You should confirm that everything is compatible before buying. SBB PRO2 comes with 1024 tokens, but as tokens are only needed by a very tiny percentage of vehicles, they can support at least 1000 automobiles. Consider buying from BUYOBDII for a good quality product.

Leave a comment

All blog comments are checked prior to publishing
[time] minutes ago, from [location]
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered
Recently Viewed