Have Questions?Ask An Expert
XHORSE VVDI BIMTOOL PRO V1.7.1 for BMW Key
2
sold in last
8
hours!
SK283-B
2.0 kg
500 In stock
$999.00
Add ethernet port, support 10/100M programming via the EthernetSo it Greatly speeds up the F/G Classis Programming (Being connected via the network cable) and coding. The XHORSE VVDI BIMTOOL PRO support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+, etc. As for CAS1/CAS2/CAS3/CAS3+ system, support reading EEPROM and synchronous code data. Support FEM/BDC system generating...
customers are viewing this product!
Add ethernet port, support 10/100M programming via the Ethernet
So it Greatly speeds up the F/G Classis Programming (Being connected via the network cable) and coding.
So it Greatly speeds up the F/G Classis Programming (Being connected via the network cable) and coding.
The XHORSE VVDI BIMTOOL PRO support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+, etc. As for CAS1/CAS2/CAS3/CAS3+ system, support reading EEPROM and synchronous code data. Support FEM/BDC system generating a key, replacing FEM/BDC control units, reset mileage.
Xhorse VVDI BIM Highlights and New Features:
- OBD key learn: support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.
- Support CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAS4+ mileage correction.
- Support DOlP Vehicle/ Module Programming
- Support BMW E-Sys and Rheingold Diagnostic System.
- Be able to replace the specialized devices. (Being connected via the network cable)
- synchronous ELV and CAS.
- Support getting read ISN data without disassembling the ECU (N13/N20/N55/N63)
- Support reset 8HP gearbox in F chassis.
Specifications:
-
Place of Origin: Guangdong China (Mainland)
- Item Type: Auto Key Programmer
- Language Support: English
- Quality: High
VVDI BIMTOOL Pro Using Notice:
1. Please don't use the Internet Port and USB Port at the same time.
For FEM/BDC Programming using the USB Port connect is ok; for Others Programming, you can connect to the Internet Port.
2. When connecting the port with the PC, first it will display"Booting", after 20 secs it will display as "BMW", then it means the connect ok.
Functions of VVDI BIM Tool
1. E-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support scan all car units
3). Support calculate all configuration units
4). Support read/write car configuration(FA)
5). Support input HW/ZB number to programming
6). Support calculate default coding from FA
7). Support edit detail coding information, change car config
8). Support many languages DTC code
2. F-Series programming, coding, DTCs
1). Support autodetect car chassis
2). Support read/write car configuration(FA)
3). Support calculate programming files from unit, car, whole database
4). Support calculate default coding from FA
5). Support edit detail coding information, change car config
6). Support detail special function list from coding
7). Support many languages DTC code
3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning
1). Support read key information, write key information
2). Support key learning
3). Support read/write EEPROM
4). Support read ECU/gearbox synchronize codes
5). Support write ECU/gearbox synchronize codes
6). Support synchronize ECU and CAS
7). Support Synchronize CAS and ELV
8). Support read ISN via OBDII
9). Support reset KM via OBDII
10). Support disable key/enable key
4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning
1). Support read CAS encrypt key via OBDII
2). Support key learning via a programmer and via the ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support update original CAS4 file
5. FEM/BDC OBD key learning
1). Support read FEM/BDC encrypt key via OBDII
2). Support key learning via a programmer and via the ignition switch
3). Support disable key/enable key
4). Support erase key position
5). Support reset KM via OBDII
6). Support read ISN via OBDII
7). Support backup/restore coding
8). Support exchange used FEM/BDC
9). Support close/open transport mode
10). Support reset ECU lock
11). Support switch on the ignition without working key
6. CAS EEPROM dump key learning
1). Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)
2). Support prepare dealer key via programmer
3). Support disable key/enable key
4). Support read ISN from working key
7. 8HP Gearbox renew
1). Support clear ISN in 8HP gearbox
2). Support backup/restore coding
3). Support reset adaptation information
For Large Quantity Order Or Dealer
We product wholesale price for customers, if you have large order please contact us by email or whatsapp to get better price. By the way, we can also provide dealer shipment for your requirement.
we will provide order tracking numbers whenever the order status is changed into "Shipped" status. The shipping company's tracking number will be posted into every customer's account page. You will be notified by your registered email with this tracking number. Along with tracking number, customers will enter the shipping company's official website to check the shipping status of your package.
The following are some links of express companies.
China Post: https://www.17track.net/en
DHL: http://www.dhl.com/en.html
EMS: http://www.ems.com.cn
TNT: http://www.tnt.com
FeDex: http://www.fedex.com
UPS: http://www.ups.com.cn
The following are some links of express companies.
China Post: https://www.17track.net/en
DHL: http://www.dhl.com/en.html
EMS: http://www.ems.com.cn
TNT: http://www.tnt.com
FeDex: http://www.fedex.com
UPS: http://www.ups.com.cn