Have Questions?Ask An Expert

Xhorse VVDI BE Key Pro Smart Key Shell

2 sold in last 8 hours!
SA1783-5+SA1794-5
0.2 kg
500 In stock
$109.00
Xhorse VVDI BE Key Pro Smart Key Shell This Key Placement is custom-made for Mercedes Benz W203 W210 W211 AMG W204 CES CLS CLK CLA SLK. the signal won't interfere with the three + one button automotive key inbuilt chip, safe and reliable, sensitive response. Little in size, light-weight in...
$109.00
customers are viewing this product!

Xhorse VVDI BE Key Pro Smart Key Shell

This Key Placement is custom-made for Mercedes Benz W203 W210 W211 AMG W204 CES CLS CLK CLA SLK. the signal won't interfere with the three + one button automotive key inbuilt chip, safe and reliable, sensitive response. Little in size, light-weight in weight, straightforward to hold, good for your automotive key. Lovely and delicate. XHORSE VVDI BE Key professional For Benz XNBZ01CH Remote Key Chip Improved Version default frequency is 315MHZ. It supported dynamical frequency to 433mhz. Here we are going to introduce 2 ways to alter Xhorse For Benz Key PCB frequency.


The VVDI BE Key Pro Smart Key Shell is manufactured from high-quality material. The device is created of high-quality material, wear-resistant and sturdy. High-quality, tested replacement components for optimum performance. Sensible quality will offer a safer guarantee for your life. The frequency of the device is high, which is extremely convenient for the device. Top-quality and really sturdy, sensible operating order.

Features:

  • More compatibility
  • New design
  • High Stability
  • High reliability
  • Digital Signature

Specifications:

  • Color: Black
  • Button: Three

VVDI BE key Pro improvements:  


1. Fix the bug that W164/W639 EIS data doesn't synchronize the key.
2. Fix the bug/fault that the BE key stop work after repeatedly turn ON the ignition without remove key out from EIS/EZS for example with work on diagnostic...switch IGN OFF---ON for erase faults...then car not start
3. Fix the bug/faultof trunk remote open on cars where power lifts on trunk door mainly...
4. Fix the bug that the BE key only sent RF signal for one time, after update, the RF signal can be sent for two times when press and release the key.
5. Modify the rolling algorithm, fix some errors of BE key.
6. Add pre-roll algorithm: the HASH value can roll ahead.
7. Adopt car-grade quartz crystal, improve infrared communication stability.
8. Boost the infrared signal when you press the button.  
9. Support resetting the key frequency between 315MHZ and 433.92 in the way of VVDI MB tool or the PCB SMD resistor

Tip: VVDI MB tool has priority over the SMD resistor, which means if you reset the key frequency with VVDI MB tool at first, the SMD resistor won't work, and you need to use the VVDI MB tool to erase the frequency then use the SMD resistor.
 
The way to reset the frequency with the PCB SMD resistor:

Method 1. Remove PCB FRE resistor change to 433MHZ.

Method 2. Change Via VVDI MB Tool Software.You can use VVDI MB software check key frequency firstly in EIS Software,other function set frequency.Then it shows 315mhz when you read frequency.Choose 433mhz to set,and check frequency again.



How to assemble the case with VVDI BE key Pro improved version board?

This post shows the general guide on how to assemble VVDI BE Key Pro imrpoved version with the Smart Key Shell 3 Button for Mercedes Benz.

1. Put the VVDI BE key Pro improved version PCB into the case.

2. Cover the bottom case.

3. Insert the battery and cover the case.

4. Push the metal strips on both sides into the right position.

If the rear metal component is first assembled, then the metal strips on both sides won't be able to pushed into the right position.

5. Here rearmetal button.

6.Put into the small key and start button.

If you want to disassemble the case, please do it from the last step to the first step.

Note: If the rear metal component is firstly assembled, then the metal strips on both sides won't be able to put into the right position.

Benz Smart Key Shell 3+1 Button
 
With a red button
With Battery Holder, With Blade
Without logo
Can be used to work with Xhorse VVDI BE Key Pro

Package List:
 
5pcs x Xhorse VVDI BE Key Pro Improved Version
5pcs x Smart Key Shell 3 Button for Mercedes Benz
we will provide order tracking numbers whenever the order status is changed into "Shipped" status. The shipping company's tracking number will be posted into every customer's account page. You will be notified by your registered email with this tracking number. Along with tracking number, customers will enter the shipping company's official website to check the shipping status of your package.
The following are some links of express companies.
China Post: https://www.17track.net/en
DHL: http://www.dhl.com/en.html
EMS: http://www.ems.com.cn
TNT: http://www.tnt.com
FeDex: http://www.fedex.com
UPS: http://www.ups.com.cn