VVDI2 BMW FEM & BDC Key Programming Authorization Service

The VVDI2 Key Programmer now adds BMW FEM & BDC functions, while the VVDI2 BMW FEM BDC system function is optional. If you need, you need to pay for this authorization.

If you have VVDI2 with BMW OBD Function, and Ikeycutter Condor, then you can buy this authorization. If you only have VVDI2 with BMW OBD Function, then you need to pay 800USD to get this authorization(SV86-S1).

There are two ways to get this function:

• If you want another BMW FEM BDC Key Programmer, you can choose YH BMW FEM Key Programmer on our site.
• VVDI2 VAG ID48 Key Chip Copy function is available as well, you can pay for VVDI2 VAG ID48 Transponder Key Chip Copy Functions Authorization Service to get this function

Specifications:

• Hardware Version: NEW
  
• Item Height: 3cm
• Item Length: 33.5cm
• Power: V
• Material Type: PVC
• Item Type: Auto Key Programmer

VVDI2 - BMW FEM/BDC System(function released and available, just no user manual)
Users can refer to the following information (3 steps for make keys: get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erasing the key position become blank position)
4.support backup coding
5.support restore coding

Notes:
1. back-up coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use the "BMW E-sys software" program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW
4.when operating on 'programming FEM/BDC system interface, please don't close this software window until all procedures are completed.
5.programming FEM/BDC system, require soldering, and get EEPROM.（FEM 95128 chip, BDC 95256 chip）usually there are 2 the same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system, must restore the original EEPROM, restore coding. if cannot restore coding or after restore coding assemble FEM/BDC module back to the car, but with the problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system 
7.if connect power to FEM/BDC module, but the relay keeps ringing, please contact technical support for help. usually, operation on FEM/BDC should be ok, just need to programming.