Have Questions?Ask An Expert

VVDI2 BMW FEM/BDC Key Programming Authorization Service

2 sold in last 8 hours!
SV86-S
0.0 kg
500 In stock
$223.00
VVDI2 Key Programmer now add BMW FEM & BDC functions, while the VVDI2 BMW FEM BDC system function is optional. If you need, you need pay for this authorization.There are two ways to get this function:Firstly, your VVDI2 must have OBD Function, then you can open this authorization:1.If you have...
$223.00
customers are viewing this product!
VVDI2 Key Programmer now add BMW FEM & BDC functions, while the VVDI2 BMW FEM BDC system function is optional. If you need, you need pay for this authorization.

vvdi2 bmw v4.3.0
vvdi2 bmw fem bdc key programming

There are two ways to get this function:
Firstly, your VVDI2 must have OBD Function, then you can open this authorization:
1.If you have VVDI2 with BMW OBD Function, and Ikeycutter Condor, then you can buy this authorization.

2.If you only have VVDI2 with BMW OBD Function, then you need to pay 800USD to get this authorization(SV86-S1).

If you want other BMW FEM BDC Key Programmer, you can choose YH BMW FEM Key Programmer on our site.

VVDI2 VAG ID48 Key Chip Copy function is available as well, you can pay for VVDI2 VAG ID48 Transponder Key Chip Copy Functions Authorization Service to get this function

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)

Users can refer to following information (3 steps for make keys: get key info->programming FEM/BDC system->make keys)

1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding

Notes:

1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use "BMW E-sys software" program FEM/BDC system. then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface, please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.(FEM 95128 chip, BDC 95256 chip)usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system, must restore the original eeprom, restore coding. if cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing, please contact technical support for help. usually operation on FEM/BDC should be ok, just need to programming.


we will provide order tracking numbers whenever the order status is changed into "Shipped" status. The shipping company's tracking number will be posted into every customer's account page. You will be notified by your registered email with this tracking number. Along with tracking number, customers will enter the shipping company's official website to check the shipping status of your package.
The following are some links of express companies.
China Post: https://www.17track.net/en
DHL: http://www.dhl.com/en.html
EMS: http://www.ems.com.cn
TNT: http://www.tnt.com
FeDex: http://www.fedex.com
UPS: http://www.ups.com.cn
[time] minutes ago, from [location]
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
VVDI2 BMW FEM/BDC Key Programming Authorization Service
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top