Note: The product does not include the software, If you need software, please ask customer service.
VNCI PT3G PorscheAuto Diagnostic tool is designed for diagnostic, programming and immobilizer operations on both old and new PorscheAuto models. Compatible with OEMPIWIS3 software driver, supports the latest OEMPIWIS software and any OEMPIWIS version. It can completely replace the original PorscheAuto diagnostic tool PT4G.
VNCI PT3G supports USB, WIFI direct connection and WIFI LAN three kinds of connection.
OEMPIWIS diagnostic software supports 23 languages, including German, English, Chinese, French, Italian, Spanish, Japanese, Polish, Portuguese, and Dutch
Support ForPorsche Auto 9PA 9YA 9YB 92A 95B 918 970 971 981 982 986 987 991 992 996 997 Y1A and all PorscheAuto models from 1996 to the present.
Introduction to OEMPIWIS3 diagnostic system:
The PorscheAuto OEMPIWIS Diagnostics system is used for fault finding diagnostics and code refresh programming of the control unit for PorscheAuto vehicles, and the OEMPIWIS3 TESTER integrates complete diagnostic functions for all PorscheAuto models.
OEMPIWIS3 also allows different control units to be read simultaneously, simplifying diagnostics.
Ecus can be coded automatically, individually, or from a control table.
The OEMPIWIS3 vehicle status record (known as the VAL Protocol - Vehicle Analysis Log) is now automatically registered when the vehicle is in use, during maintenance, and after maintenance has been completed.
The OEMPIWIS3 can be used for DC and AC voltage measurement, DC and AC current measurement, diode test, resistance measurement, on/off or open circuit test to show the change of voltage, current and resistance over time, with oscilloscope function.
OEMPIWIS3 Software system Troubleshooting Guide is faster and easier to use. It can display all diagnostic information, initiation procedures, and possible fault sources, and significantly revised "guided fault finding" (GFF) means that repeated repairs (" first fix ") are further reduced. Integrated online teaching function, easy operation, integrated new database, direct access to the PorscheAuto OEMPIWIS workshop technical information system
1. Diagnose the application
2. Boot Fault Finding (GFF)
3. Actual value/input signal function
4. Drive link/test function
5. Maintenance/repair function group
6. Coding/programming function group
7. Logging8. filter
9. Application of wiring diagram
Supports PorscheAuto PPN online remote, has the latest PIDT engineering database, allows you to code Panamera, Cayenne E3, Taycan and more Features and specifications of the OEMPIWIS system.
Read/clear error codes, capture data flow, computer programming matching, component testing, service information consulting, component field drawing, wiring diagram.
PorscheAuto OEMPIWIS Tester IV works with old and latest PorscheAuto cars. It comes with a Panasonic laptop and original test software. The PorscheAuto OEMPIWIS Tester IV helps you diagnose and program the latest and old PorscheAuto cars. Examples include the 911(997)(991), Boxster/Cayman(987), 2010-2010 Cayenne, 2011-2011 Cayenne, and Panamera.
The new Panamera can only be diagnosed using the PorscheAuto OEMPIWIS Tester IV. According to the current project plan, all early models will be gradually replaced by the new PorscheAuto OEMPIWIS Tester IV by the end of 2010. The PorscheAuto OEMPIWIS Tester IV covers all-new PorscheAuto models such as the all-new Panamera 971, Cayenne 9Y0 E3, Panamera 992, Cayman 982 GT4 Clubsport, etc., which do not support the OEMPIWIS II at all. Will not support it in the future.
Support PorscheAuto. Once the early diagnostic procedures are transferred to the PorscheAuto OEMPIWIS Tester IV, the OEMPIWIS Tester I will no longer be available. When PorscheAuto OEMPIWIS Tester IV is distributed, it will include a basic software. This is necessary to start and configure the tester. This system will support PorscheAuto Macan CarPlay activation and PPN online remote support, it does not support PorscheAuto CarPay full screen activation.
PorscheAuto OEMPIWIS support system
Engine automatic transmission, air conditioning, SRS, ABS, ASR, MPL, GM, original anti-theft system, keyless system, OBDII system.
BGM gateway module online programming
PorscheAuto Tekken Sport software update
The rear/front modules are programmed, new or used depending on the state of the car
Key programming (keys sorted by VIN)
Second-hand ECU CP module is unlocked
Engine control module replacement programming
Transmission module PPN online programming
OEM renovation project PPN coding programming
2019-2022 Sport Chrono Sport plus remote activation of OEMPIWIS4 and 5054A VCI
Each project checks the OEM retrofit wiring diagram, such as 360 Surround view, ACC, AMP
OEM modification remote guide technical support hourly or per VIN login check
OEM Apple CarPlay activation for the PorscheAuto Macan 95B via PPN online
OEMPIWIS 4 System update supports PPN online and PIDT new
Gateway module online programming -
PorscheAuto Taycan Sports Software Update -
Back/front end module programming -
Key programming (key press VIN order)-
Used ECU module CP unlock -
VTS Disable -
OEM retrofit project PPN coding programming -
Check the OEM retrofit wiring diagram for each project -
OEM retrofit remote guide technical support every hour
PorscheAuto OEM refit, please specify item -
OEM Apple CarPlay online activation via PPN -
OEMPIWIS3 System update supports PPN online and PIDT new -
SMARTPCM Device Suite for PCM Solutions -
PCM5 MH2p Full screen CarPlay enabled -
PCM5 MH2p Android automatic activation -
PCM4/4.1 MHI2 Android Automatic activation -
PCM5 MH2p system Region conversion USA -> EU, USA -> Japan, USA - tw -
PCM4/4.1 MHI2 system Region Conversion USA -> EU, USA -> Japan, USA - tw -
Tel: 86 15827411186
Whatsapp: 86 15827411186