Autohex II BMW Full Package
Autohex II for BMW is full of advanced functions that will help you to solve problems you thought they are out of your hands.
You can program any BMW Ecu if it is used or new, some Ecus must have further actions before or after flashing, for example: DME and DDE flashing is not enough to start the car, you must match the ISN between DME and CAS.
DME and DDE ISN read and write as well as CAS ISN read and write functions, make you able to perform changing DME and CAS easily, also this function helps a lot in Key Programming.
You also can program keys in BMW using Autohex II, it supports all versions of CAS (1 to 4+), you will find there is an easy solution to solve the case of: All keys lost.
Note: this tool do not accept return for refund, just accept one year warrantry for repair, please know this.
Using Microtronik Autohex II BMW Full Package you can do as following:
● Read old ISN in BMW E series for following Ecus: D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
● Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
● Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
● Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
● ISN Reading from Tricore Ecus by boot mode.
● Indivedual Programming for any Ecu in BMW E and F series
● Ecu Swapping if hardware is matched.
● CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
● Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
● BMW E series EGS ISN matching with CAS
● BMW F series EGS 6HP and 8HP EWS Resetting
● BMW E Series, F Series and G Series coding for all Ecus (calculation of Ecucoding is calculated from FA)
● BMW advanced coding (manual coding)
● Vehicle order modification and backup and restore from LM,FRM,...ETC
● Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
● Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
● Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
● Read and write ISN of MSD85, MSD87, MSV90 in F series.
● ECU Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported ECU List).
● Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
● Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool
● Modify KOMBI Mileage by HexTag tool
● Renew all BMW keys, and many other brands by HexTag tool.
1. HexTag ECU Cloning Function is free for 90 days only.
After 90 Days, ECU Cloning License will cost $1000, and $350 for annual update fee.
2. We offer one year warranty, while return for refund is not acceptable.
Autohex II BMW Full Functions:
Programming BMW ECU Individually
BMW Ecu Programming is an easy to use with Autohex II, it performs Flashing the Ecu with latest version,code it,Change VIN, and other functions in one step
BMW ISN Reader & Writer Software
BMW ISN Editor Software in Autohex II lets you read ISN from DME, match it with CAS. This is essential for DME or CAS replacement, Autohex reads ISN from wide range of DME/DDE
Coding BMW ECU Individually
Autohex II Ecu coding for BMW is a straight forward function, you can choose between Auto and Manual coding to encode the Ecu you wish
BMW Ecu Manual Coding
Autohex II BMW Software can do two methods of Ecu coding, auto coding which will be calculated from FA, and a manual coding for Ecu modification
BMW Vehicle Order Editor
Autohex II BMW Software can write FA into CAS from other Ecus,backup FA in other Ecus, also you can modify the vehicle order safely
BMW EGS ISN Synchronization
Autohex II supports EGS EWS Reset for 6HP in E series and EGS EWS Reset for 8HP in F and G series, only few steps are required
For making keys, reading ISN and changing VIN for CAS which comes with specified part numbers, will not work just through direct reading, CAS Firmware function should be done to make it work
BMW Key Programming E Series And Mini
BMW Key programming by Autohex II is done by OBD, No dump is required. including CAS with latest update and all keys lost. it supports all BMW Models as well Mini cooper.
FEM & BDC Unlocking
Autohex II is the only tool that can unlock FEM/BDC without soldering, and it is the only tool that regenerates a secret file, and the only tool that can restore FEM back
Autohex II HW4 and full functions available in BMW from ISN read write to key programming and BMW Ecu programming and coding (HexTag is included)
Using this kit you can do following:
Autohex II Support BMW ISN:
Read old ISN in BMW E Series ECUs:
D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
Read Long ISN (SK) in BMW F Series ECUs:
MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
ISN Reading from Tricore ECUs by boot mode.
Indivedual Programming for any ECU in BMW E and F series
ECU Swapping if hardware is matched.
CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
BMW E series EGS ISN matching with CAS
BMW F series EGS 8HP EWS Resetting
BMW E Series, F Series and G Series coding for all ECUs (calculation of Ecucoding is calculated from FA)
BMW advanced coding (manual coding)
Vehicle order modification and backup and restore from LM,FRM,...ETC
Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)
Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
Read and write ISN of MSD85, MSD87, MSV90 in F series.
Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool
Modify KOMBI Mileage by HexTag tool
Renew all BMW keys, and many other brands by HexTag tool.
Microtronik Autohex II BMW Update Log:
AutoHex II BMW Diagnostic Software Version 1.0.61
Faulty BDC2_Gateway and BDC3_Gateway will be repaired while Autohex is calculating vehicle order.
Autohex will initialize Flexray automatically in the new BDC3_Gateway.
Security Access problem in some Ecus in newest BMW models (2019, 2020) has been solved in this version.
Corrected some MSD85 ISN writing using factory mode.
AutoHex II BMW Diagnostic Software Version 1.0.60
BMW I series has been added in this version, users can diagnose, program, encode and do other functions like BDC replacment, adding keys,..etc.
Flashing data has been updated for F and G series, and coding for G series has been enhnaced.
More BMW Ecus are supported in factory mdoe for ISN read/write and working hour reset.
Initializing the brand new BDC2 in latest models in F/G series is added, users will need only to program the BDC to be activated.
Corrected some ISN read/write in Factory mode.
AutoHex II BMW Diagnostic Software Version 1.0.59
Read ISN of: DME_83T1, DDE803, DME88T0, DDE803P, DME_88T0, DME_84T0 for F and G series without opening Ecu.
Read/Write ISN of: DME841H, DME861, DME841, DME_860, DME_840, DDE832C, DME_840H for F and G series without opening Ecu.
Autohex II users can read and write MSD80, MSD81, MSD85, MSD85.4 and MSV90 by factory mode. No more opening the Ecu is required.
BDC latest version, the unlock function has been added in this update.
FA calculation for 2020 models has been improved.
AutoHex II BMW Diagnostic Software Version 1.0.58
Flashing data has been updated for F and G series
Coding data has been updated for F and G Series
New G series models are supported like: G05, G14,G20,G83,...
New F seRies models are supported like: F40, F42, F44, F91,...
Fixed the FA calculation for F and G series 2019 and up models.
Fixed coding issues in F and G series models 2019 and up.
EGS 6HP EWS reset for F series has been enhanced.
AutoHex II BMW Diagnostic Software Version 1.0.57
CAS4 Unlock by OBD, with this function you can make a new key, delete akey, change CAS ISN, change CAS VIN,..etc
EGS 6HP EWS Reset for BMW F series can be done in few seconds.
More supported Ecus in ISN Factory mode like MEVD17.23, MED17.2 and MEV17.2
Minor issues have been corrected in the software.
AutoHex II BMW Diagnostic Software Version 1.0.56
ISN Factory mode for MEV1723 DME (MINI and F series) has been added in this version.
EGS EWS Reset function is able to support more versions of EGS in F and G series.
USB Driver has been upgraded to support latest versions of Windows 10.
Power supply monitor in Autohex II HW4 has been improved to allow poor power supply
to be able to work with AutoHex.
AutoHex II BMW Diagnostic Software Version 1.0.55
ISN Factory mode is available in this version. With this function you can read/write
ISN in DME and DDE besides to modify the working hours without opening the DME/DDE.
We are happy to announce that Autohex II is the only tool that supports this feature.
Flash data updated for BMW F and G series as well as MINI and Rolls Royce.
Ecus calculations from BMW vehicle order has been enhanced to support latest models in F and G series.
ISN by OBD II for F series has been enhanced to support more Ecus versions.
ISN Boot mode has one more DDE to support.
AutoHex II BMW Diagnostic Software Version 1.0.54
A new function for replacing FEM/BDC (including key transferring from original to donor) is available in this version, users can use this function from CAS replacement.
Deleting keys from CAS4,CAS4+ FEM and BDC is available in this version, users can use this function from key programming.
Fixed the FA parsing for new models (2018-2019) in F and G series.
Turkish language is supported starting from this version.
Other languages is updated in this version.
AutoHex II BMW Diagnostic Software Version 1.0.48
Added following models for coding and programming: F23, F88, F90, F97, F98, G01, G02, G08, G11, G12, G13, G30, G31, G32, G38.
Mileage reset for FEM and BDC is available from Unlocking Function (see picture).
ISN can be written in FEM and BDC (from ISN manager)
Added new diagrams in ISN boot mode to help HW4 users in making the connections.
AUTOHEX BMW Version 1.0.47
A new enhanced software version is available for all BMW Autohex users which rectified all issues regarding FEM/BDC unlock and more stabilized for programming ECU using E-net. Unlike the old versions getting secret file from FEM/BDC can be done all on bench.
No need to go for advanced option for unlocking.
Software has become 100% safer and stable for programming FEM - GW and FEM - BODY on bench without any working key.
Also Ethernet allows users to flash units like HU-H,KOMBI..etc in F series in reduced time period without any error.
Autohex II BMW Technical Parameters:
Processor ARM Cortex M3
Power Supply 8-18V
Power consumption 2.5 -3.5W
Max Working Temperature 50 ℃
Diagnostic socket EOBD II16 Pins
Host Interface Full Speed 12MBPS USB 2.0
Wireless Connection Wi-Fi 802.11 b/g/n
Operating system Windows 7 , Windows 8 a nd Win dows 10
Autohex II BMW Full Package Package includes:
Autohex II Hardware WVCI HW 4
The powerful HexTag BDM and Key programmer
BMW Software Standard License
ISN Boot Mode License
BMW Ecu Programming License
BMW Key Programming License
BMW ISTA/D driver to run dealer software
1 year technical support
1 year hardware warranty
1 year online access to online programming
Review 1: AUTOHEX is for a lot the most powerful, safe and easy tool.
It can do since a fast diagnostic till make a new key when all are lost or an other more complex functions like read/write ISN of most dme at the market.
Review 2: AUTOHEX II BMW software is like wearing a magic cloak! Let me show you how special it is. It gives you:
basic diagnostic scan, individual programming and coding, above all, the awesome part is--you can use it for programming any time and any where with access to internet or even mobile hotspot, and it is far more simpler than the BMW engineer software.
Review 3: A great device and powerful functions, more functions and full flash programming server , a special feature is that can get or update any ECU flash program from AUTOHEX sever , even the ECU has lost flash while programming it.
I did experience the case , a day while I was programmin a E60 on DME flash , then the DME damaged because I lost the power of my pc , then I restarted my pc with full power to resume the job on DME flash programming again , every thing went to be good and working , the car was able to crank and started , so the device is completely suitable to locksmiths and diagnostic workers on vehicles.
For Large Quantity Order Or Dealer
We product wholesale price for customers, if you have large order please contact us by email or whatsapp to get better price.
By the way, we can also provide dealer shipment for your requirement.