Have Questions?Ask An Expert

Launch X-PROG 3 Advanced Immobilizer & Key Programmer for X431 V Pro/V+ Pro3/PAD V/PAD VII

2 sold in last 8 hours!
XTYSK368
2.0 kg
500 In stock
$799.00 $679.00
Features: 1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code. 2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated. 3. Supported systems:...
$679.00
DHL Free Shipping
customers are viewing this product!
Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Compatible with: X-431 PRO GT, X431 PRO 4.0, X431 PRO 3 4.0,X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD VX-431 PAD VII

5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

x-prog 3

Advantages

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

Supported ECU MCU List:(support more than 1000 models, keep updating)
 
Atmel NSC
Fujitsu  Philips
Infineon Renesas M16
MC68HC05 Renesas M32
MC68HC08 Renesas M32R
MC68HC11  Renesas R32C
MC68HC12 Renesas R8C
MediaTek  Renesas V850 SPI
MicroChip Renesas V850 UART
Nordic Samsung
ST SiLabs

Support EEPROM List:(support more than 1000 models, keep updating)
 
4Wire  GI Numonyx SST
Adesto GigaDevice OKI  ST
AKM Grundig ON Semi Toshiba
Altera HOLTEK Other  Winbond
Amic Hynix  PCT Xicor
Atmel  I2C  Philips xUSSR
BOSCH ITT Pioneer YMC
Catalyst KHIC  PMC  Spansion
Chingis Macronix  Ramtron SPI
Dallas/Maxim MicroChip Rohm NEC
EON Micron Samsung  NSC
ESMT MicroWire Seiko  Ford
EXEL Mitsubishi  Siemens Fujitsu
Fairchild Motorola Sony    

X-431G vx X-Prog 3
 
Item Name X-prog X-Prog 3
EEPROM Read and Write ×
MCU Read and Write ×
Mercedes Benz Key ×
Key Simulator ×
VW 4th instrument disassembly/reading/all lost ×
Read Engine via Bench Mode ×
Read Engine via Boot Mode ×
VW 4th All Key Lost without Account ×
Read Gearbox ×
Read and Write Key
Read BMW ISN ×
Read CAS4+/FEM Chip ×
Audi 5th generation steering column chip reading and writing ×
Replace OBD Reading Component
Specification    
Interface DB15 DB26, DB15
Input Power DC12V DC12V
Working CurrentMax 200mA 500mA
Power Consumption 2W 5W
Storage Temperature -20¡æ~70¡æ -20¡æ~70¡æ
Working Temperature -10¡æ~50¡æ 0¡æ~50¡æ
Size 142*72 mm 228*120 mm
           
Specification:
 
Interface DB26, DB15
Input Power DC12V
Working CurrentMax 500mA
Power Consumption 5W
Storage Temperature -20¡æ~70¡æ
Working Temperature 0¡æ~50¡æ
Size 228*120 mm

we will provide order tracking numbers whenever the order status is changed into "Shipped" status. The shipping company's tracking number will be posted into every customer's account page. You will be notified by your registered email with this tracking number. Along with tracking number, customers will enter the shipping company's official website to check the shipping status of your package.
The following are some links of express companies.
China Post: https://www.17track.net/en
DHL: http://www.dhl.com/en.html
EMS: http://www.ems.com.cn
TNT: http://www.tnt.com
FeDex: http://www.fedex.com
UPS: http://www.ups.com.cn
[time] minutes ago, from [location]
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Launch X-PROG 3 Advanced Immobilizer & Key Programmer for X431 V Pro/V+ Pro3/PAD V/PAD VII
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top