Newest MB STAR C6 With SSD V2023.06 With DOIP Wifi Multiplexer VCI Diagnosis Tool SD Connect For Benz Car Diagnostic Tool

Description:

For Mercedes-Benz diagnostic instrument designed by tested in full compliance with OBD2 protocols. It will not affect vehicle ECU and sensors, safes and reliable diagnostic. Please park vehicle safety before working with MB STAR C6.

Introduction:

MB STAR C6 conforms to the SEA J2534 protocol. Professional for detecting vehicle faults via diagnostic software with laptop or computer.Support Protocols：ISO15765(CAN),ISO 14230,ISO 9141, J1850, ISO13400(DoIP)

Support Voltage: 16V Max

Connecting computer:

1. By USB connecting cable.Option

2. By WI-FI

Diagnostic Software:Xentry,DAS,Vediamo,DTS Monaco,ectSupport vehicle: all of 12V forMercedesBenz but those non-standard Agreement models 124,140,170,202,210,463,107,126,201）Support Latest Authorization 206,223 DOIP Vehicle.

ECU Supporting:

Available Diagnostic/ program all ECU, including:Engines (All Gasoline & Diesel Systems)

Transmissions and Electronic Selector Modules

Airmatic and Active Body Control Suspension Systems

Traction Systems: ESP / ASR / ETS / ABS / BAS /

SBC braking systems

Supplementary Restraint Systems (SRS) / Airbag,

All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s

Drive Authorisation System

Sam (Signal Acquisition) Modules

Electronic Ignition System (EIS)

Pneumatic System Equipment and ATA functions

Air Conditioning / climate control Systems

Instrument Cluster

Tyre Pressure Control

Parktronic System

Keyless Go

D2b Command & Audio Gateway (D2B and MOST

networks)

TV Tuner

Headlamp Range Adjustment

Seat Electronics

Rvc, RST & Vario Roof modules

Automatic Clutch System ACS

M-Class Body Modules (AAM / EAM / DAS / SEM / VG

Transfer Case)

Assyst & ASSYST + systems（205,213,167 DoIP programming of the multimedia system HU did not be supported at present）

Detection function:

1.Malfunction diagnosis (read fault codes, delete fault codes, view data flow, action test, ​ fault guidance)

2.Programming & coding (supports offline programming of engineer version, ​variation coding, modification and installation, power upgrade, modification of ​ the maximum speed limit, etc.)

3.Support simulation program, learn How to use (xentry, DTS,)

4.Maintenance data query, maintenance disassembly video (WIS, StarFinder,SDMedia)

5.Parts inquiry (EPC)

Computer configuration:

Configuration CPU i5 Up, 4GB Running Memory at least.

It is recommended to use a solid-state hard disk above 256GB.

The software in hard disk we provide already includes full software system.

This software only available for our commodity C6 VCI.

Please do not connect other devices for diagnosis.

It doesnot allow to install other irrelevant software or drivers.

If the software was damaged,please contact the supplier for remote assistance, or send the hard disk back for reinstallation.

​

MB STAR C6 Usage

Xentry DAS

Connect the C6 VCI via 16Pin cable to car OBD2 diagnostic seat, secondly use USB cable to the computer.

And you can also connect C6 to computer through WIFI without setting.

It obtains an IP address automatically. Its Wireless"UPSTAR".

Open XENTRY Diagnosis car

User name: xentry,password: 123456

Choose the car model you were connecting with

Contact Information:

Email: buyobd@gmail.com
Tel: 86 15827411186
Whatsapp: 86 15827411186
Skype: Marshall.obd2