Have Questions?Ask An Expert
GODIAG V600-BM Diagnostic and Programming Tool For BMW
GODIAG V600-BM Diagnostic and Programming Tool For BMW
The GODIAG V600 Tool is a professional diagnostic & programming/coding tool for BMW. It will replace GT1, OPS, OPPS, ICOM, ICOM A2, ICOM A3, ICOM NEXT. V600-BM CAN-FD J2534 can access all systems of the newest For BMW car models to quickly read / clear fault codes, read dynamic data stream, active test, activation, components replacement, ECU replacement and upgrading, personalized settings, ECU programming, retrofitting, and upgrading car configuration, SCN Coding, transmission initialization, enable the hidden features, etc.
This GODIAG V600-BM Can perform vehicle intelligent diagnosis, all-system all-function fast diagnosis; can read & clear fault codes, read data stream, actuation test, etc. ECU programming and calibration. Fully compatible with official diagnostic software. Multi-task diagnosis based on the efficient architecture design of diagnosis service software. The Diagnostic feedback supports a one-key upload of the device logs. If you encounter an exceptional vehicle and abnormal function, you are allowed to report the problem to the manufacturer. Then the technicians will track and handle your problem.
Features:
- With a size of about 108 x 52 x 27 mm, the pocket device is more portable.
- Brand new industrial design, the shell is made of solid and stain-resistant material, it is more suitable for the automobile maintenance environment.
- Support WiFi wireless connection, high-speed transmission, long-distance transmission, stable signal, and strong anti-interference; WiFi can be set as STA or AP mode at the same time, making users work in a comfortable indoor environment.
- Support wired Ethernet connection, can freely switch between 2 modesWAN / LAN.
- Support protocols for BMW diagnosis, including ISO14230, ISO15765, IFH, DOIP, etc.
Specifications
- Suitable power: 7-32 V
- About: 300 mA when the power is 12V
- High-speed processor: CPU 580 MHz MIPS, 32MB FLASH,128MByte RA, Built-in 32G TF card(optional)
GODIAG V600 Update Schedule:
1. Plan to add authorization of Benz, Land Rover, Jaguar, CAN-FD, Toyota, VW, Audi (ODIS software)
2. Dedicated Android APP is under development. It will support both Ethernet and WiFi
communication.
Comes with ISTA-D, ISTA-P, Tool32, For BMW Coding, ISPI, INPA, E-SYS, WINKFP, NCS-Expert Tool, and you can directly run them.
Compatible Protocol: J2534, CAN-FD, DOIP, D-CAN, ISO14230, ISO15765, IFH, K-line ******
Support OEM professional diagnostic function of all For BMW series:
1 series: 1'_E81/E81/E87/E88,1'_F20/F21
2 series: 2'_F22/F23,2'_F45/F46,2'_F87
3 series: 3'_E46,3'_E90/E91/E92/E93, 3'_F30/F31/F34/F35,3'_F80
4 series: 4'_F32/F33/F36,4'_F82/F83
5 series: 5'_E39,5'_E60/E61,5'_GT(F07), 5'_F10/F11/F18
6 series: 6'_E63/E64,6'_F06/F12/F13
7 series: 7'_E38,7'_E65/E66,7'_F01/F02/F03/F04, 7'_G11/G12
X series: X1_E84,X1_F48/F49,X3_E83,X5_E53,X5_70,X6_E71,
X6_E72,X3_F25,X5_F15/F85,X6_F16/F86,X4_F26
Z series: Z4_E85/E86,Z4_E89
I series: I'_I01/I02
MINI: MINI_R50/R52/R53, MINI_R55/R56/R57/R58/R59/R60, MINI_F55/F56
GODIAG V600 stand-out features:
1. Contained with dedicated For BMW software (same as ICOM, ICOM A2 / A3 / NEXT, etc., no need to install any driver.)
1) ISTA-D: used to read / erase fault codes, read the data flow, maintenance guidance, circuit diagram, wiring diagram, and directly upgrade & program new models. It will activate the ignition switch without keys during diagnosis.
2). ISTA-P: an off-line programming and coding software system, including the latest database for programming E, F, G, K, I series models
3). Engineer programming & coding software for F series vehicles 
4). WINKFP: engineer programming software for E series vehicles.
5). NCS-Expert Tool: engineer programming software for E series vehicles.
6). INPA: engineering diagnostic software for E series vehicles.
7). Tool32: engineer command execution software for E series vehicles.
8). For BMW Coding Tool: WINKFP NCS auxiliary software for importing engineer data for E series vehicles.
2. Provide a variety of communication modes:
USB 2.0
DoIP indicator
Ethernet 10/100Mbps
WIFI/BT 802.11 indicator 150Mbps
ETH indicator
System Indicator
3. Specifications
Suitable power: 7-32 V
About 300 mA when the power is 12V
High-speed processor: CPU 580 MHz MIPS, 32MB FLASH,128MByte RA, Built-in 32G TF card(optional)
4. Replace any of these For BMW diagnostic tools: For BMW ICOM, ICOM A2 / A3 / Next, etc. 
5. The Button Function:
F1-Press it for more than 3s to reset the factory setting
F2-Press it to restart the system
V2021.01 BMW ICOM ISTA/D 4.15 ISTA/P 3.65 500G Format HDD
ISTA-D 4.27.22
SDP Programming Database 4.25.4, Multilingual
VIN: 2020.06.08
ISTA-P 3.67.1 supports BMW motorcycle and electric vehicle programming.
for BMW ETK 2019.12
for BMW KSD 2019.11
INPA 5.00, winkfp 5.2.3, NCS 3.5.1
BMWAi Refresh Hidden 4.6
E-SYS V3.30 and V3.30, database V67.0, Chinese version software added
DR.GINI B020
The latest FSC navigation code software and IBAC coder
Added DISV57 and DISV44 for old B.M.W cars, diagnostic and programming
Multi-language available in diagnosing, programming and TIS diagram circuit: English, German, Spanish, Russian, Simplified Chinese
New E-Sys feature:
Convert FA to OrderXML file
CR2859 - Encoding 2.0 in E-Sys CR2945 - CVN mapping file in PX container for storing E-Sys functions of CAF
CR2969 - E-Sys - New CAF data model for CAFE-E plug-in coding factory
CR2977 - (E-Sys) FP Certificate Management
CR3008 - New Module TA1 Filter Editor
KA1223 - Use log level mode from properties files in batch
KA1224 - "Restore Defaults" for TAL Processing Parameters
KA2521 - E-Sys: For TAL execution, save the file name and path of the executed TAL log
KA2768 - Expanding TACategory fscBackup from E-Sys KA2807 - Multiple selections and deletions of elements in PDX containers
KA2809 - Multiple vehicle order selection during code verification
KA2825 - Enhanced configuration options for ECUVariantPatterns at E-Sys
KA3009 - Extend the namespace of the PDX container for RSX KA3035 - Rename "Bit6" to "CertEnabled"
K0941 - Read the output event type of SVTsollK?1002 - TAL processing in VCM in TAL calculation and coding module
K1071 - Allow multiple selections in event type selection
K1229 - Service call GetSoftwareID function should be able to do without specifying a diagnostic address
Note that ISTA-P does not support the latest G-system programming, as there is no G-system yet.
V600-BM Parameters:
|
Shell |
The shell is made of Polyamide. |
|
Power Supply |
7-32 V |
|
Current Consumption |
About 300 mA when the power is 12V |
|
CPU |
580 MHz MIPS, 32MBFLASH, 128MByte RA, built-in 32G TF card(optional) |
|
Operating System |
Linux |
|
WiFi |
150Mbps Wi-Fi 1T1R 802.11bgn |
|
Bluetooth |
Bluetooth5.0/5.1 |
|
Interface |
USB 2.0 |
|
Indicator |
DoIP indicator |
|
Buzzer |
Sound Pressure Level: MIN.80 dB |
|
Temperature |
Working：-20 ... +55°C, Storage：-20 ... +85°C |
|
Protection Rating |
Dust prevention and water resistance conform to IP52 |
|
Conform to |
Noise emissions：EN 55011,EN 55022 |
Package includes:
1pc x GODIAG V600-BM CAN-FD J2534
1pc x 2021.03 BMW ICOM HDD 500G
For Large Quantity Order Or Dealer
We product wholesale price for customers, if you have large order please contact us by email or whatsapp to get better price. By the way, we can also provide dealer shipment for your requirement.
The following are some links of express companies.
China Post: https://www.17track.net/en
DHL: http://www.dhl.com/en.html
EMS: http://www.ems.com.cn
TNT: http://www.tnt.com
FeDex: http://www.fedex.com
UPS: http://www.ups.com.cn
