What Is The Difference Between Lexia Full Chip and this newer AER LEXIA-3 PP2000?
The biggest difference is that AER LEXIA-3 has only one cable in the package, you can connect the device directly to your car and computer by this cable, more convenient to use it, and the weight is lighter than the old one.
1.Package Comes With V7.02 Diagbox Default CD, If you need V7.83 software, we will send you software link.If your CD was broken or can't readable, please contact us for software download link. DO NOT OPEN DISPUTE OR GIVE NEGATIVE FEEDBACK!
2. Please remember toshut down your anti-virus software. And then disconnect the internet.If you do not know how to install it, please watch our video first.
3.Diagbox Update Password:
Diagbox V7.XX to V7.76: scary01
Diagbox V7.76 to V7.82: Maitresox01
Diagbox V7.82 to V7.83: Very Simple!
4. Update Attention:please cut the file "C:AWRoot\bin\fi\APPDIAG.SYS" out before update, and then click update package!after complete update please paste the cutted file back into the previous folder. which can avoid activating problem.
5. For programming,diagbox support basic programming, but some programming like car alarm system need account username and password, we don't supply& haven't username and password.only for citroen and for peugeot center repair shop has username and password, please note it.
1.Firmware Version:Full Chip 921815C With 12PCS JAPAN NEC Relay+7PCS OPTOCOUPLERS
Full Chip 921815C With 12PCS JAPAN NEC Relay+2PCS OPTOCOUPLERS
Software:Lexia3 V48, PP2000 V25, Diagbox V7.83
System Require:Winows XP or Windows 7 32bits only, These three softwares can not install on same laptop.
2.Works with most of for Citroen and for Peugeot cars from 1995 to 2015.
3.Support Multi-languages: English,German,French,Japanese,Russian,Spanish,Portuguese,Swedish,Turkish,Dutch,Polish,Italian,Hungary,Greek,Czech
Lexia 3 dealers diagnostic scanner for comprehensive for Citroen and (for Peugeot) cars. You can do most as an authorized Dealer does. This diagnostics software allows you to perform complete diagnostics of all from 1995 till present models. Diagnostics is performed via OBD II connector (which is located near the steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Unlike other universal car scanner tools which only read fault codes;this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor,CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1. Read identification
Displays complete identification of control unit, e.g. part number,software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
This function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed,Battery voltage,Oxygen Sensor,Coolant Temperature, etc.Values can be displayed in graph, 9 values at once, or full listing (all measured values).Logging to file is also supported,which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Compatible Vehicles List:
Just As Reference, We Can Not Make 100% Sure If Works On Your Car Or Not, Need You Test Yourself!
For Citroen: for CZERO, C1, C2, C3 DS3, C4, DS4, C5, C6, C8, for C-CROSSER, for NERO, for BERLINGO, for JUMPY, for AX, for SAXO, for BX, for ZX,for XSARA, for XANTIA, for XM, for EVASION, for C15
For Peugeot: for ion, 107, 206, 207, 307, 308, RCZ, 407, 508, 607, 807, 1007, 3008, 4007, 5008, for BIPPER, for PARTNER, for EXPERT, for BOXER, 106, 205, 306, 309, 405, 406, 605, 806
Diagbox Installation Tips:
1. Windows 7 32bit is the best choice,other system maybe some problems sometimes. So please choose windows 7 32bit
2. Need turn off the Internet conection,turn off the Antivirus software
3. All the steps of installing the Diagbox is in the "video for installation",Yes,all the steps,
of course, we shortened the waiting time,to complete the installation of the Diagbox may take about
three hours.Please be patient
4. The version 7.02 and version 7.57 is the most stable version,is the most perfect version.
so if version 7.57 can meet your requirements, you don't need to spend a lot of time to upgrade to higher version
1.Run DTLite4454-0314,install Virtual drives
2.Load the file of DBV0702 into Virtual drives,and run Diagbox_setup,
activated manually, complete the installation of Diagbox 7.01 and 7.02.
A.When you see "installed successfull",the version is 7.01,quit the software,
then open Diagbox on the desktop,wait ,then 7.02
B.Quit the software, cut the file "APPDIAG.SYS" from C:AWRoot\bin\fi\APPDIAG.SYS"
and store at other folder,then click update package to operate upgrading,
After finsh updating, please cut back the file "APPDIAG.SYS" into the previous folder.
then restart the computer,,then open Diagbox on the desktop,,wait ,,then new version
C.Repeat step 2 when updatinge any package ,
remember restart the computer,cut the file,cut back the file,every updating.