New XPROG-M 6.12 ELDB V6.12 ECU Chip Tuning Tool With USB Dongle and Full Adapters

2 sold in last 8 hours!
XTY19081
1.0 kg
498 In stock
$169.00 $149.00
XPROG-M V6.12 Highlights:1. New Generation Hardware, runs more steady and faster than old version.2. Latest software version: V6.12, Firmware V5.43. Add new authorization:AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)4. Language: English5. Operating system: WinXP/Win7/Win8Difference between this Xprog m V6.12...
$149.00
Free Shipping
customers are viewing this product!
XPROG-M V6.12 Highlights:

1. New Generation Hardware, runs more steady and faster than old version.
2. Latest software version: V6.12, Firmware V5.4
3. Add new authorization:
AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
AUTH-0028-3 Renesas RL78Authorized and AUTH-0028-4 Renesas M32C Authorized(New Add)
4. Language: English
5. Operating system: WinXP/Win7/Win8

Difference between this Xprog m V6.12 version and v5.84, v5.74:

Xprog V6.12 Added Aauthorized:
AUTH-0028-3 Renesas RL78 Authorized
AUTH-0028-4 Renesas M32C Authorized

Added 4 Adapters:
ADP-0019 Rev.B ----New!
ADP-0006 M35080 ICP adapter ---New!
QFP64 MC908AZ/AS60 3K85K adapter ---New!
QO18S714 ---New!
xprog m v6.12 new adapter
It improve the PCB performance

xprog m v6.12 pcb

XPROG-M V6.12 Using Tips:
1. XPROG-M V6.12 dongle isn't compatible with older version Xprog.
2. Please close all anti-virus software in your computer, because the anti-virus software will kill Xprog-M V6.12 driver.
3. Disconnect internet. If not, the internet may damage XPROG hardware.
4. Uninstall all the old version XPROG software before you install V6.12 software, because XPROG-M V6.12 hardware is not compatible with other versions of XPROG software.
5. Never try to UPDATE it, the hardware will be damaged if you try to update it online.

Installation Notice:
The windows system requirements are as follows:
1. Windows system should be windows XP 32bit or windows 7 64 bit, all the patch software for the windows system should be installed already and the
windows properly works well...
2. The windows system should be with at least 2 partitions (except the CD ROM.)
3. Can not be working with virtual hard disk.

Xprog M V6.12 Software Installation:
1. Click the file "installation.reg", get the file information to the regedit.
2. The file "AdbeRdr11000_zh_CN.exe" must be installed, otherwise the Xprog software will fail to start.
3. Plug the Xprog main interface to the computer and install the USB driver.
4. Copy the folder "XPROG-BOX6.12" to the desktop, and open it, and run the "xprogdesktop.exe", then open the software.

How to Connect Xprog-M 6.12 ECU Chip Tuning Tool
xprog m 6.12 connection

XPROG-M V6.12 Authorizations:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view ange mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
AUTH-0027-1 HC(S)908 update Authorized 2016/3/13
AUTH-0027-2 HC(S)908 security Authorized 2016/3/13
AUTH-0028-1 Renesas V850 Authorized 2017/10/9
AUTH-0028-2 Renesas Super H Authorized 2017/10/9

XPROG-M V6.12 Newly Added Authorizations:

AUTH-0028-3 Renesas RL78 Authorized
AUTH-0028-4 Renesas M32C Authorized

XPROG-M V6.12 Adapters:

ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter

XPROG-M V6.12 Newly Added Adapters:

ADP-0019 Rev.B
ADP-0006 M35080 ICP adapter
QFP64 MC908AZ/AS60 3K85K adapter
QO18S714

Additional Adaptor for 5M48H P-Flash

ADP-0019 Rev.A
EWS3 adaptor
EEPROM adaptor
QFP28 adaptor
QFP64 adaptor
QFP80 adaptor
QFP112 adaptor
QFP144 adaptor

XPROG-M V6.12 added functions(a part) are shown below:
 
XPROG-M V6.12 added functions



Package list:

1PC x XPROG-Box Hardware (Aluminum Enclosure)
19PCs x Adapters Set
1PC x USB Cable
1PC x 16Pin Cable
1PC x CD with XPROG-Box Software (V6.12)

FAQ:

Q: I follow your installation video to install the xprog m v6.12 software step by step, but it display"waiting certificate", could you help?
A: Whether you plug the usb dongle and connect the device?

Q: The lastest xprog v6.12 with all adapters?
A: Yes, it comes with all adapters.

Customer Reviews

Based on 1 review Write a review
we will provide order tracking numbers whenever the order status is changed into "Shipped" status. The shipping company's tracking number will be posted into every customer's account page. You will be notified by your registered email with this tracking number. Along with tracking number, customers will enter the shipping company's official website to check the shipping status of your package.
The following are some links of express companies.
China Post: https://www.17track.net/en
DHL: http://www.dhl.com/en.html
EMS: http://www.ems.com.cn
TNT: http://www.tnt.com
FeDex: http://www.fedex.com
UPS: http://www.ups.com.cn
[time] minutes ago, from [location]
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
New XPROG-M 6.12 ELDB V6.12 ECU Chip Tuning Tool With USB Dongle and Full Adapters
You have successfully subscribed!
This email has been registered
ico-collapse
0
Recently Viewed
ic-cross-line-top
Top
ic-expand
ic-cross-line-top