CR-C Common Rail Diesel Injector Tester For Bosch/Denso SH60




149 reward points
Qty: Unit(s)
Related Download Files:

CR-C Common Rail Injector Tester For Bosch/Denso SH60

The order cover two products (common rail injector test tool and Nozzle validator test tool )
kindly note CR-C common rail injector tester is only for electromagnetic injector, it is not with piezo function


CR-C Common Rail Injector Tester
CR-C common rail injector tester is a easy operated tool, could do the test with the injector hand pumps. It’s small size and light weight, could meet the requires from repairman on the simple device of testing.

Technical Parameters:
Produce Model:    CR-C Common Rail Injector Tester
Testing Range:  atomization, pilot, emission and full load condition.
Test Injectors:    Boscch, Densso, Delphii common rail injectors.
Working Voltage: AC220V
Working Temperature:    -30C°——70C°
Size:    110*250*190mm
Adjustable Width:  10 MS

Common rail diesel nozzle Injector tester  SH60

Diesel Injector Nozzle Pop Tester fuel injector nozzle tester with 0 - 400 BAR / 0 - 6000 PSI Dual Scale Gauge BOSCH injector checker is suitable for all common rail injector and mechanical injectors, auxiliary products have compression release valve, it can check the fuel injection conditions of various types of injector quickly and easily. It also can be used with common rail injector 118 solenoid valve tester to test various types of common rail injectors. The injector checker equipped with two different types of tubing. You can freely switch suitable for detecting the injector, it is a good choice to Initial inspection injector working state.   

How to Test
As we know driver common rail injector,not only need  a tester but also need hight pressure fuel,so we used a manul fuel pressure pump  SH60  as  show in follow picture

1. the high pressure oil common rail injector directly or into the holder is connected to the common hand pressure calibrator.
2. according to the corresponding plug injector brand choice, will harness and injector connected up correctly.
3. according to the fuel injector brand, drive mode selecting corresponding, at this time can hear the injector solenoid valve suction armature "Pa, Pa" voice.
4. by constantly under pressure calibrator lever, provide the suitable injection pressure, the general pressure value takes 30-40MPA best, at this time can be observed on the fuel injector atomization performance.
5. through the external cylinder, can be detected on the injector fuel injection quantity and oil return.



24hour Online Customer Service:

There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed


Customer Videos: See all 0 videos
Customer Images: See all 0 images